Digitally Compatable Aerial Articles @ Easy Fit Aerials

Fitting a F Connector



The following steps must be followed to fit in a F connector.

1. First, You need to clip the outer cable sleeve by at least an inch.

2. The next thing to do is to pull and take the braided strands away from the cable's end.

3. Once this is done, inter section of the cable needs to be cut by two thirds.

4. While making sure that there is a considerable distance between the centre of the cable as well as the braiding, the F connector is then screwed on to the cable.

- 2010-01-26 16:21:57

When will the switchover occur?

The biggest question most people ask it when will the switchover occur.

The switchover is happening by TV Region, such as Granada, Tyne Tess as this is more recognisable than some of the transmitter names. As they go through and update a transmitter your area will gain access tot he digital channels.

At a certain point in the future the old Analogue signal will be switched off, at this point the digital signal will become slightly stronger. If your unsure about your Area then you can enter your Postcode and House Name or Number here to find out further details.